SAFETY
319
ULTRA-WARE® Storage / ULTRA-WARE® Caps
Flat Bottom Reservoirs with Graduations Designed for preparation, storage and delivery of all liquid chromatography mobile phases. As part of our ULTRA-WARE® series, these reservoirs are recommended for use under vacuum for filtration and vacuum degassing of mobile phase solvents. • Plastic safety-coating blocks UV light up to 385nm, preventing photo-degradation of light-sensitive reagents • Safety coating helps to retain glass fragments and allows a reasonable amount of time for the safe disposal of liquid contents • Used with internal pressures up to 0.4 bar (6 psig) for helium sparging and blanketing of the mobile phase • Operating Pressure: -1.0 to 0.4 bar (-14.5 psig to 6 psig) • Chemically inert glass prevents leaching of any extractables into the mobile phase solvents • Supplied with GL-45 screw thread • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
ULTRA-WARE® Three Hole Delivery Caps •
Caps have ¼”-28 threads top and bottom with 1/8” ID holes to accept 1/8” OD PTFE tubing
• •
Body is PTFE
Supplied complete with three ¼”-28 CTFE plugs and a TFE/propylene o-ring
Part Number 953913-0000
Screw Thread
Case Qty
GL 45
1
953913- 0001
Replacement Parts
Case Qty
953930- 0005
Part Number
Description
Overall Height x Diameter (mm)
Part Number
Capacity (mL)
Case Qty
ETFE Nut Plug 1/4”-28, Used to Seal Ports with Flat Bottom 1/4”-28 Threads
953913-0001
1
953932-0252 953932-0502 953932-1002 953932-2002 953932-5002 953932-1003 953932-2003
250 500
203 x 85 230 x 105 275 x 130 319 x 150 373 x 205 433 x 255 578 x 315
1 1 1 1 1 1 1
953903-0005
GL 45 Screw Cap
1
1000 2000 5000
10000 20000
ULTRA-WARE® Three Valve Delivery Caps • Three on-off valves have ¼”-28 threads top and bottom • Valve body is PTFE • Valve stem material is CTFE • O-ring material for valve stem and lower seal is TFE/ propylene
ULTRA-WARE® Filtration Caps • Body is constructed of glass-filled PTFE with a vacuum adapter for 1/4” ID tubing • Upper screw clamp holds a solvent pickup adapter or funnel • 40-60 micron porosity fritted glass filter support is removable • Supplied with a PTFE/propylene o-ring Part Number Filter Diameter (mm)
Part Number 953903-0000
Screw Thread
Case Qty
GL 45
1
Screw Thread Case Qty
953915-0047
47
GL 45
1
953903-0002 953903-0003 953903-0004 953903-0042
Replacement Parts
Part Number
Case Qty
Replacement Parts
Description
953914-0002
953914-0002 47 mm Upper Screw Clamp
1
Case Qty
953914-0001
Part Number
Description
47 mm 40-60 micron Porosity Glass Support Frit
953914-0001
1
953915-0001
953903- 0005
953903-0002 953903-0003 953903-0004 953903-0042 953903-0005
Blue Valve Handle Red Valve Handle Yellow Valve Handle
1 1 1
953915-0001 953914-0006
1/4” PFA Hose Barb
1 1 1 1
PTFE Drip Tip
953981-0004 Lower Cap Retainer Ring
953914-0006
Short CTFE Valve Stem 1
953981-0005
GL 45 Lower Screw Cap
953981-0004
GL 45 Screw Cap
1
953981-0005
Accessories
Part Number
Description
Case Qty
ULTRA-WARE® Conversion Base for Caps
953984-0090
1
953906-0090 90 mm Standard Pickup Adapter 953906-0047 47 mm Standard Pickup Adapter
1 1
Powered by FlippingBook