SAFETY
320
ULTRA-WARE® Adapters / Safety System 3
ULTRA-WARE® Conversion Base Converts the five valve, four valve and filtration caps to use 90 mm filter membranes, providing up to four times faster filtration.
ULTRA-WARE® Solvent Pickup Adapters Designed to be used with the five valve, four valve and filtration caps to provide safe, in-line filtration that replaces the traditional pour-and-wait funnel filtration method. • The unique Bevel-Seal™ makes a vacuum-tight o-ring connection to the PTFE tubing • The HI-VAC® valve is easier to open under vacuum than the standard stopcock • Closing the valve provides vacuum degassing after filtration • Each unit is supplied with 3 feet (91 cm) of 1/4” OD FEP PTFE tubing • 953906-6347 and 953906-6390 have FFKM o-rings and are THF-resistant • Valve o-ring size is 010 and sidearm o-ring size is 108 • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
• The conversion base is manufactured from glass-filled PTFE and is supplied with a coarse porosity (40-60 micron porosity) glass support frit and an upper screw clamp • Requires a 90 mm 953906 series solvent pickup adapter Part Number Case Qty 953984-0090 1
953914-0092
Replacement Parts
Part Number Diameter (mm)
THF Resistance Case Qty
Part Number Case Qty 953914-0092 90 mm Upper Screw Clamp 1 953914-0091 90 mm 40-60 micron Porosity Glass Support Frit 1 Description
953914-0091
953906-0047 953906-6347 953906-0090 953906-6390
47 47 90 90
No
1 1 1 1
Yes
No
Yes
Replacement Parts
Accessories
Case Qty
953906-0001 953906-6301
Part Number
Description
Part Number
Description
Case Qty
953906-0002 47 mm Pickup Adapter Body 953906-0092 90 mm Pickup Adapter Body
1
953906-0090 90 mm Standard Pickup Adapter
1
1 953906-0001 Standard Valve Plug Assembly 1
90 mm THF-Resistant Pickup Adapter
953906-6390
1
953906-0002 953906-0092
Blue Glass-Filled Nylon 15-415 Open-Top Compression Cap, Hole Diameter 8.5 mm
410119-1508
12
3 Safety
410119-1508
System
Safety System 3 is a unique Solvent Bottle Adapter that is made from PBT and converts ULTRAWARE® GL-45 mobile phase caps to standard 4L solvent bottles for direct connection to your HPLC pump. It is also available without the solvent bottle-to-GL-45 thread adapter. • Eliminates the safety hazards of aluminum foil-wrapped solvent containers • ULTRA-WARE® Economy Three Hole Cap is manufactured from PTFE with a TFE/propylene o-ring and a polypropylene screw collar • Three connecting threads on top of the cap use standard ¼”-28 flangeless fittings • Two ports have 1/8” through-holes for connection to the inlet / sparge filter • The third port has a 1/16” through-hole used as a vent port during sparging Included with your Safety System 3 is the unique Bottom-of-the-Bottle™ Inlet/ Sparge Filter. • The filter combines the functions of an inlet filter with a sparger in a single, convenient device • Sparging bubbles are prevented from entering the mobile phase stream while allowing the pump to draw all but a few milliliters of solvent from the reservoir or bottle • All PEEK construction makes it ideal for virtually all mobile phases • Supplied with 2 μm porosity frits and connections for 1/8” OD tubing. Part Number Description 953930-0000 Safety System 3 with GL-45 Bottle Adapter 953930-0001 Safety System 3 without GL-45 Bottle Adapter
Economy Three Hole Cap
Solvent Bottle Adapter
Port for sparging line (optional use)
Port for solvent intake line
Each Safety System 3 consists of the following: 953913-5000 1 ea. Economy 3-Hole Cap, GL-45 953907-0000 1 ea. Solvent Bottle Adapter, GL-45 (included with 953930-0000 only) 953916-3002 1 ea. Combination Inlet / Sparge Filter, 2 μm, PEEK™ 420821-0018 2 ea. Flangeless Nut, ETFE, ¼”-28 x 1/8” 420822-0018 2 ea. Flangeless Ferrule, ETFE, 1/8” (Optional) 953913-0001 1 ea. Vent Port Plug, ETFE, ¼”-28 420823-0018 1 ea. Tubing, FEP PTFE, 1/8” OD x 1/16” ID x 10’
Filter Article No. 953916-3002
Draws solvent from bottom of solvent bottle
Filters incoming sparging gas (optional use)
Powered by FlippingBook