STIRRERS
329
Bearings / Shafts / Blades / Rods
10 mm Precision Stirrer Bearing Precision bearing for use with 10 mm stirrer shafts.
10 mm Precision Polished Shaft Glass stirrer shaft with a precision-polished surface.
• Stirrer bearing with built-in lubricant reservoir honed for a 10 mm OD shaft • Unit has integral Standard Taper joint for use with a variety of flasks • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438 , Type I, Class A requirements
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Overall Length (mm)
Part Number
Shaft OD (mm)
Case Qty
786520-0260 786520-0261
10 10
440 445
1 1
Use with Shaft OD (mm)
Standard Taper Joints
Part Number
Case Qty
781001-2440
10
24/40
1
Propeller Combination Shaft • Made from #303 stainless steel • Features three angled blades • Shaft diameter is 3/8”
10 mm PTFE and Glass Stirrer Bearing These bearings are ideal for use with series 786500 glass 10 mm precision ground stirring shafts. • Threaded glass ground joint bearings seal against the stirrer shaft by means of a PTFE o-ring, a precision bore PTFE sleeve bearing and a PTFE tightening screw with lock nut and washer • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number 790015-0000
Shaft OD (mm)
Material
Case Qty
9.5
303 Stainless Steel
1
Use with Shaft OD (mm)
Standard Taper Joints
Stir Blades PTFE stirrer blade fits 786500 and 786520 shafts.
Part Number
Case Qty
781050-2440 781050-2942 781050-3445 781050-4550
10 10 10 10
24/40 29/42 34/45 45/50
1 1 1 1
•
Blade is 1/8” thick
• 4” cylindrical reaction flasks accept PTFE blade 789030- 0022
For Flask Capacity (mL)
10 mm and 19mm PTFE Stirrer Bearing These solid PTFE stirrer bearings are ideal for use with series 786500 glass 10 mm precision ground stirring shafts and 19 mm precision ground glass stirring shafts.
Part Number
Width (mm)
Case Qty
789030-0019 789030-0020 789030-0021 789030-0022 789030-0023 789030-0024
50, 100 50, 100
46 48 60 75
1 1 1 1 1 1
200, 250, 300
500, 1000 2000, 3000
110 130
5000
Use with Shaft OD (mm)
Standard Taper Joints
Part Number
Case Qty
781010-2440 781010-2942 781019-2942
10 10 19
24/40 29/42 29/42
1 1 1
Stirring Rods •
KIMAX® solid stirring rods with rounded ends
• Designed from Federal Specification NNN-R-560, Type I requirements • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
10 mm Precision Ground Shaft •
Glass stirrer shaft with a precision-ground surface
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number
Diameter (mm)
Length (mm)
Case Qty
40500-125 40500-150 40500-200 40500-250 40500-300 40500-375
4 5 5 6
125 150 200 250 300 375
800 800 600 600 300 200
For Flask Capacity (mL)
Part Number
Shaft OD (mm)
Case Qty
10 10
304151-0000 786500-0261 786500-0262 786500-0263 786500-0264
500
10 10 10 10 10
1 1 1 1 1
100 to 5000
12000 22000 50000
Powered by FlippingBook