TUBES
361
Culture / Sampling / Drying
Drum Sampler Conventional open-end drum thieves provide a quick method for sampling unmarked drums.
Caps with PTFE-Faced Rubber Liners • Excellent for general laboratory use • Specially formulated phenolic resin and liner adhesive to withstand the effects of repeated autoclaving • PTFE faced/general purpose white rubber liners are highly resistant to chemical effects • Identified in ASTM Specification E982, Class A requirements Part Number GPI Finish Case Qty 73802-13415 13-415 500 45066C-13 13-415 300 73802-15415 15-415 500 45066C-15 15-415 300 73802-15425 15-425 144 73802-18400 18-400 144 45066C-18 18-415 225 73802-20400 20-400 144 73802-22400 22-400 144 73802-24400 24-400 144 45066C-24 24-410 150 45066C-28 28-410 150 73802-33430 33-430 144 73802-38430 38-430 144 45066C-38 38-430 50 73802-8425 8-425 144
•
Units are easily broken for quick disposal
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements Part Number Capacity (mL) OD (mm)
Case Qty
76000-25 76000-75 76000-150
25 75
8
100
12 18
25 25
150
Straight Drying Tubes with 14/20 Joints Vertical-type drying tube for use with a suitable desiccant such as calcium chloride, or a molecular sieve.
•
Joints are the same size
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements Part Number Length (mm) Standard Taper Joints
Case Qty
291000-0000
130
14/20
1
KIM-KAP™ Polypropylene Closures KIM-KAP® polypropylene closures for culture tubes.
Straight Drying Tubes Useful as a molecular sieve for running anhydrous reactions.
• •
Autoclavable Color coded
Part Number
Tube OD (mm)
Color
Case Qty
•
Straight tube with a bulb desiccant chamber
73660-13 73660-16 73660-18 73660-20 73660-25 73660-38 73662-13 73662-16 73662-18 73662-20 73662-25 73663-13 73663-16 73663-18 73663-20 73663-25 73664-13 73664-16 73664-18 73664-20 73664-25 73665-13 73665-16 73665-18 73665-20 73665-25
13 16 18 20 25 38 13 16 18 20 25 13 16 18 20 25 13 16 18 20 25 13 16 18 20 25
Natural Natural Natural Natural Natural Natural
1,000 1,000 1,000
• The stem is designed for use with a BEVEL-SEAL™ adapter or a rubber stopper • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
500 500 250
Part Number Length x Width (mm) Stem OD (mm) Case Qty 562490-0000 145 x 30 8 1
Red Red Red Red Red
1,000 1,000 1,000
500 500
Green Green Green Green Green Yellow Yellow Yellow Yellow Yellow
1,000 1,000 1,000
Standard Taper Joint Bent Tubes 75° angle-type tube for use in fume hoods where a vertical-type tube will not fit.
500 500
1,000 1,000 1,000
• • •
Beaded rim resists breakage
Supplied with rubber stopper and glass inlet tube
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements Part Number Overall Length (mm) Overall Width (mm) Case Qty 291100-0000 65 105 1
500 500
Blue Blue Blue Blue Blue
1,000 1,000 1,000
500 500
Powered by FlippingBook