VACUUM & AIRLESS
367
Inlets / AIRLESS-WARE®
Inlet Adapters • Supplied with the patented 809000 pressure/vacuum retainer • Used with sleeved stopper 882311 • 211300 series has a 801001 glass plug and an inner standard taper joint • 211330 series has a PTFE plug and an outer standard taper joint • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
AIRLESS-WARE® Pressure Release Valve Designed for applications that require evacuated apparatus to be filled with an inert gas to one atmosphere.
•
Uses include the introduction of an inert gas into a vacuum desiccator or nitrogen into Airless-ware® apparatus
• A pressure release valve should be placed between the nitrogen source and nitrogen manifold on all Airless-ware® manifold installations • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements Operation: Three mL of paraffin or silicone oil is added to the bubbler. One arm is connected to the low-pressure gas source, the other to the manifold or Airless-ware® equipment. The check valve prevents oil or air from surging into the apparatus.
Standard Taper Joints
Part Number
Plug Material
Case Qty
211300-1420 211300-2440 211330-1420 211330-1922 211330-2440
14/20 inner 24/40 inner 14/20 outer 19/22 outer 24/40 outer
Glass Glass PTFE PTFE PTFE
1 1 1 1 1
Part Number Height (mm)
Fits Tubing ID (inches)
Case Qty
216100-0000
130
0.375
1
AIRLESS-WARE® Vacuum Valve Adapters Vacuum valve adapter for closing joints on AIRLESS-WARE® vessels while allowing reconnection to funnels or other components, with minimum exposure to air or water vapor. • Kimble® PTFE vacuum valve minimizes contamination and maintains vacuum in the micron region • Tip seal of valve is directed toward a normal storage vessel • Plug is 826601 • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Replacement Parts
Part Number
Description
Case Qty
Size 2 mm Straight Bore Stopcock Plug, PTFE, 11/25 mm Plug Size
821001-0002
1
809000-0021 1 882311-0000 Sleeved septum stopper with off-center hole 144 Size 21 Stopcock Plug Retainer
AIRLESS-WARE® Transfer Adapters Used to transfer fluids between two flasks or as a one- piece distillation unit.
Standard Taper Joints
Overall Height (mm) x Overall Width (mm)
Case Qty
Part Number
211450-1420 211450-2440
14/20 24/40
130 x 60 190 x 60
1 1
•
A variety of flasks or adapters may be connected to this unit to use at reduced pressure or under an inert atmosphere
•
All joints are the same size
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Standard Taper Joints
Overall Height (mm) x Overall Width (mm)
Case Qty
Part Number
Replacement Parts
211410-2440
24/40
155 x 270
1
Part Number 826601-0004
Description
Case Qty
Size 4 Valve Plug
1
AIRLESS-WARE® Filling Adapters Designed for use with a solvent repurifier to facilitate product removal from the storage area. • This adapter will provide clearance from the boiling flask and attaches to a 213210 solvent storage flask • Hose connection allows access to vacuum source or inert gas • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
AIRLESS-WARE® Connecting Adapter with Glass Plug Converts standard flasks, funnels or other components to airless applications.
•
Stopcock has patented 809000 pressure/vacuum retainer
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Standard Taper Joints
Part Number
Overall Height (mm) Case Qty
Standard Taper Joints
Overall Height (mm) x Overall Width (mm)
Case Qty
Part Number
211230-2440
24/40
250
1
211200-1420 211200-2440
14/20 24/40
115 x 80 155 x 80
1 1
Powered by FlippingBook