Environmental
104
E-Z Sampler ® ■ Ideal for sampling unknowns from open-top drums and tanks ■ Manufactured from chemically resistant polypropylene ■ The E-Z Sampler ® has a 39” (100cm) head/shaft assembly and is supplied with a 125mL borosilicate glass bottle with a PTFE lined cap ■ Filling ports are located above the bottle to ensure that it is completely filled to reduce the possibility of air entrapment ■ Bottle has a 33-430 screw thread finish
Sample Bottle, Narrow Mouth ■ For use with Sub Surface Grab Sampler ® I & II ■ 1000mL narrow mouth borosilicate glass bottle ■ 38-430 screw cap with PTFE liner ■ Autoclavable ■ The bottle has a hand grip for easy handling
Cat. No. 990477
Description
Qty / Case
1000mL Bottle with Cap
1
Cat. No. 885020 885025 240480
Description
Qty / Case
Complete Unit with Bottle 125mL Bottle, with Cap
1
Sample Bottle, Wide Mouth ■ For use with Sub Surface Grab Sampler ® III ■ 1000mL wide mouth borosilicate glass bottle ■ 70-400 screw cap with PTFE liner ■ Autoclavable ■ These wide mouth sample bottles can be repeatedly autoclaved and come with PTFE-lined caps Cat. No. Description
12
Replacement Cap
100
Sub Surface Grab Sampler ® I ■ Ideal for sampling from spillways, docks and other sub surfaces ■ No need to physically enter the sample area ■ Eliminates surface contamination ■ Helps meet EPA requirements for water and wastewater sampling ■ Lightweight construction
Qty / Case
990476
1000mL Bottle with Cap
1
■ Constructed of 72” x 3/4” (183 x 2cm) square aluminum tubing with a golden anodine finish ■ Provided with a 1000mL narrow-mouth borosilicate glass sample bottle with a PTFE-lined cap and clamps for large and small bottles Cat. No. Description
Qty / Case
990250 990477 240481
Sub Surface Grab Sampler ® I
1 1
Replacement Sample Bottle, 1000mL, 38-430
Black Phenolic Replacement Cap
100
Sub Surface Grab Sampler ® II ■ Excellent for accessing fluid flow in deep manholes and hard to reach sub-surface sampling areas ■ Helps meet EPA requirements for water and waste water sampling
■ Available in lengths up to 18’ (5.5m) ■ Each sampler consists of an inert
polypropylene head with stainless steel fittings and an aluminum pole assembly with a golden alodine finish ■ Provided with a 1000mL narrow-mouth borosilicate glass sample bottle with a PTFE-lined cap ■ To use it, screw a sample bottle into the head and lower to the desired depth ■ Pull the cable at the top of the handle which will lift a spring-loaded plunger from the bottle opening, allowing liquid to enter through four 5/8” diameter holes ■ Release the cable when the bottle is full to reset the plunger Cat. No. Description Qty / Case 990350 6’ (183cm) Sub Surface Grab Sampler ® II 1 990400 12’ (366cm) Sub Surface Grab Sampler ® II 1 990450 18’ (549cm) Sub Surface Grab Sampler ® II 1 990477 Replacement Sample Bottle 1 240481 Black Phenolic Replacement Cap 100
Powered by FlippingBook