[Clyde Apac] Product Overview

Selama 60+ tahun, Clyde-Apac jadi panutan filtrasi udara dan kontrol kontaminasi. Berstandar Australia, produknya dipercaya dunia—dari laboratorium hingga layanan kesehatan.

Laboratory Equipment

CREATING SAFER LABORATORIES

CONTAINED STORAGE VENTILATION CSV CABINET

APPLICATIONS Clyde-Apac CSV safe storage cabinets are designed to contain laboratory chemical fumes (including formalin) and other odours given off by specimen jars and bottles during storage.

OPERATION Recirculating CSV modules utilise a direct drive fan that draws ambient air into the cabinet from the air intake that is located under the viewing window. Air passes through the perforated storage shelves and into the exhaust filter system, consisting of two stages of filtration, prior to being recirculated into the room. The first stage prefilter arrests > 90% of particles 5 micron and larger. The final activated carbon filter incorporates carbon granules with a selected chemical impregnation to optimise the arrestance of specific vapours. Specific impregnations are available for the handling of a wide range of contaminants. The contaminants include: - Formaldehyde and glutaraldehyde - Alkaline odours - Ammonia and amines - Inorganic acids and acidic odours - H2S and mercaptans - HCN Cabinets operate on single-phase 240V, 50 Hz power via a 10A outlet. A low voltage touch control panel with function status indicated by LEDs is located on the front of the cabinet. An audible alarm indicates low air flow within the cabinet. Ducted models are designed to work with building ser- vices and can be fitted with additional filtration systems.

DESCRIPTION CSV cabinets are manufactured in a variety of configurations including self contained units fitted with optional HEPA, carbon filters and ducted models that are designed to be connected to building services. The cabinets are manufactured in Australia and are available with a nominal width of 90cm or 150cm. Each cabinet is factory-tested to ensure compliance with relevant Australian standards.

CONSTRUCTION

Anodised aluminium frame with safety glass doors and viewing windows, fitted with self levelling feet

FRAME

SHELVES

Five adjustable, perforated stainless steel

DRIP TRAY Removable stainless steel tray for spill catchment Minimum capacity 10L EXHAUST MODULE Laboratory grade baked enamel coated mild steel FAN Direct drive centrifugal with variable speed control CONTROLS Low-voltage control panel with function indication

> 0.5m/s across opening with doors closed Boost mode activated when doors are opened

AIRFLOW

VOLTAGES

220/240V 50Hz single phase

CURRENT

Maximum 750W

ON-SITE TESTING Products produced by AES are factory- tested to ensure compliance and performance targets are met. Additional testing and certification is recommended as follows: - On-site prior to use - After any electrical of mechanical maintenance - After filter replacement - After re-location - At least annually - In special circumstances, e.g. if faulty operation is suspected. AES Environmental is a NATA registered laboratory that provides comprehensive on-site maintenance, testing and certification services of safety cabinets, laminar flow work stations, cleanrooms, operating theatres and HEPA filter installations.

AES Environmental maintains an ISO 9001:2008 quality management system to ensure process and product conformance.

THE COMPANY AES Environmental is an Australian owned

manufacturing business producing products under Clyde-Apac, Email Air Handling and Vokes brand names for industries that are as varied as industrial plants, commercial buildings, power stations, food processing, healthcare, science and electronics. AES Environmental considers the Australian Standards as a core component of its product mix and has developed an export market in 25 countries, promoting Australian Standards, engineering and manufacturing solutions. AES Environmental, a trusted manufacturer capable of delivering reliable product solutions to highly- critical applications, where the control of hazardous airborne contamination is often critical to process and personnel.

HOW TO SPECIFY Contained Storage Ventilation (CSV) cabinets shall be Clyde-Apac manufacted by AES Environmental. CSV cabinets shall be produced in 304 grade stainless steel and 6mm thick, toughened glass shall be used for the viewing window. Air shall enter the storage cabinet through the base of the door assembly and shelves must be slotted as to create air passage ways through-out storage areas. Recirculating CSV units shall be fitted with an appropriate fan and filter housing so as to provide safe containment to occupants of the laboratory, ducted units shall be fitted with top spigot connections at a minimum of 300mm diameter.

GENERAL SPECIFICATION CSV STORAGE CABINETS

Model

CSV90

CSV150

Nominal Size (W)

900mm

1500mm

External Dimensions (W)

900mm

1500mm

Internal Work Zone Dimensions (D)

600mm

Working Opening

Two doors

Fans

Optional

HEPA Filter

Optional

Carbon Filter

Optional

Typical Efficiency

99.997%

Germicidical UV Lamp

Optional

Fluroescent Lamp Cabinet Construction

Optional

Stainless Steel 304

Front viewing window

Glass 6mm

Spigot Options

Top

ADVANCED TECHNOLOGY FOR SAFE HANDLING OF CYTOTOXIC DRUGS

CG2010 CYTOGARD CYTOTOXIC DRUG SAFETY CABINETS

APPLICATIONS

Cytotoxic drug safety cabinets are defined in Australian Standard AS2252.5 as the primary barrier against exposure to aerosols that are produced in the preparation, manipulation and dispensing of cytotoxic drugs. Many of these drugs are known to be mutagens and are suspected of being carcinogens and teratogens. Recent work involving prions has proven that exposure may result in effects that are insidious and may not manifest themselves for some years. The requirements for protection involve the following: • Protection of cabinet users and other staff from exposure to aerosols or vapours which may be generated in the preparation, manipulation, and dispensing of cytotoxic drugs; • Protection of drug products, so that they may be prepared in an environment which is essentially free from particulate and biological contamination; • Protection of cabinet maintenance personnel from the residue of drug particles which can contaminate filters, fans and other mechanical components.

DESCRIPTION

CG2010 CytogardTM drug safety cabinets are designed and manufactured in Australia in three nominal widths – a 900mm, 1200mm and 1800mm – and fully comply with all requirements of Australian Standard AS2252.5. Cytotoxic cabinets are necessary for operator and product protection, in addition to the safe guards provided by an effective air barrier and Clyde-Apac Microseal TM HEPA filter technology, CG2010 series is also equipped with a carbon filter to remove harmful vapours that may be released during the compounding process. CG2010 series are essential for the protection of personnel, product and the environment.

AES Environmental maintains an ISO 9001:2008 quality management system to ensure process and product conformance.

AUSTRALIAN STANDARDS

CG2010 CytogardTM drug safety cabinets are designed and manufactured to comply with all requirements of Australian Standard AS2252.5. Each cabinet is factory-certified by a NATA Accredited laboratory to meet the specified performance requirements. These cabinets may also be used where the handling of other drugs and chemical requires both containment and aseptic manipulation. Cytotoxic safety cabinets are part-recirculating laminar air flow enclosures with high efficiency particulate air (HEPA) filtration of exhaust air and an air barrier at the work opening. HEPA-filtered vertical laminar airflow which is recirculated in the work zone creates an ultra- clean work environment for product protection. An air barrier between the operator and the work zone is maintained by a flow of room air into a full width grille in the work opening. The barrier air mixes with the recirculated laminar flow air in a sump underneath the work surface and is exhausted from the cabinet via a HEPA filter which is located directly under the work tray. All positive pressure zones and filter seals are surrounded by negative pressure zones, so as to contain potentially hazardous aerosols.

Cabinets are available with the work zone width of 90cm, 120cm or 180cm and are free standing units that incorporate a floor stand. Standard cabinets have exhaust discharge on the right-hand side with optional left-hand side or top exhaust available. Top exhaust is typically specified where cabinet exhaust air is to be entrained into the room exhaust in accordance with AS2252.5. These cabinets provide advanced system monitoring technology and a number of unique design features intended to enhance safety and ease of use.

CONSTRUCTION

filter. A prefilter extends the life of the exhaust HEPA filter and protects it from mechanical damage during cleaning of the work zone.

CABINET Constructed in electro-galvanised steel with joints welded using a gas shielded arc process. This method produces a robust, leak free housing that is able to withstand the rigours of transport and handling. The exterior is finished in a high-quality powder coat which has been developed for laboratory equipment. WORK ZONE Constructed in grade 304 stainless steel with 2B finish. Corners are radiused and crevice- free for ease of cleaning and all surfaces are carefully dressed to remove sharp edges. The removable work tray is designed to allow cleaning access to its underside without removing it from the cabinet. A pneumatic mechanism opens and closes the viewing window without the need for external fasteners or catches. The window is self-supporting in the fully open position to facilitate cleaning and access for large items. Opening the window with the cabinet running automatically engages a boost mode for enhanced containment by activating a maximum exhaust airflow and the alarm systems. HEPA FILTERS Clyde Apac MicrosealTM HEPA filters, are manufactured to meet requirements of AS4260. Each filter is individually certified to be leak free in accordance with AS 1807.6. A manufacturer endorsed test label fitted with an extract of the test report is affixed to each

FANS Separate direct drive fans are provided for the exhaust and laminar flow HEPA filters. Fans are fitted with speed controllers to enable airflows to be maintained through filter life. The fan control circuits are interlocked so that the laminar flow system will not operate until the exhaust system has achieved a containment condition. Audible and visible alarms with rechargeable battery back-up signify any reduction in barrier containment or laminar airflow. ELECTRICAL Cabinets operate on single-phase 240V, 50 Hz power via a 10A outlet. The electrical system complies with Australian Standard AS3100. A low voltage touch control panel is located on the front of the cabinet. The Optima 2000TM microprocessor-controlled control and diagnostic system provides continuous monitoring of critical cabinet functions with a digital display indicating the nature of any malfunction.

FEATURES

Exhaust fan

Negative pressure plenum

Exhaust fan plenum

Laminar flow fan

Positive pressure plenum

Laminar flow HEPA filter

Air barrier

Prefilter

Knee space

Exhaust HEPA filter

• Optima 2000 TM prorammable control and diagnostic system with digital display • Low voltage touch controls • Alarms and boost mode automatically engaged when viewing window is open • Boost mode selectable at control panel • Selectable post-use over-run timer • Hour meter to record operating time • Provision for interface with building energy management systems

• Pneumatically assisted viewing window • Magnahelic gauge to monitor fan systems

STANDARD FEATURES

• Fully-sealed work opening cover for testing procedures • Comprehensive operation and maintenance manual

• Activated charcoal exhaust filter • Work area power outlet • Ultra-violet germicidal lamp • Gas tap (solenoid-interlocked) • Service taps (vac, air, CO2, etc.) • Hanging rail in work area

OPTIONS

Overall Dimensions (mm)

Work Zone Dimensions (mm)

Weight (kg)

Model

W D

CGA90

1135

770

2310

880

560

610

326

CGA120 1440

770

2310

1180

560

610

372

CGA180 2050

770

2310

1790

560

610

487

RHS exhaust

LHS exhaust

Top exhaust

Model

CGA90

2030021

2030022

2030023

CGA120

2030201

2030202

2030203

CGA180

2031201

2031202

2031203

PERSONNEL PROTECTION

WARNING

Cytotoxic drugs and prions are hazardous to human health. It is necessary to protect both users and service personnel. For those applications where personnel and environmental protection is required, Clyde- Apac Class I or Class II biological safety cabinets, or cytotoxic drug safety cabinets (as applicable) should be considered.

OPERATION

2 3

8 9

Control Panel 1. Fan/post-use over-run switch 2. Power outlet switch 3. Gas reset switch* 4. Fluorescent light switch 5. UV lamp switch* 6. Boost mode switch 7. Display panel 8. Mains power indicator

9. Alarm indicator *optional function

4 5 6 7

High-efficiency filters and fans deliver quiet operation and safety. Negative pressure zones surround all positive pressure areas, eliminating the possibility of contaminated air bypassing the filter or escaping from the cabinet. In operation, vertical laminar airflow gently passes from the Laminar HEPA filter to the sump HEPA filter to create a biologically clean work area. In Cytotoxic cabinets: An air barrier across the work access opening, into the sump, reduces potential risks to personnel from airborne contaminants in the work zone. In Cytotoxic models, the airflows combine

in the sump area beneath the work floor and pass through an extra HEPA filter before recirculation via a return air plenum, to the top housing. Separate fan/filter arrangements allow independent adjustment to maintain an effective air barrier. A microprocessor is used to control the speed of the blower motors. This microprocessor also allows fingertip control of functions and status including: • Cabinet performance and status clearly displayed in plain English. • Boost mode. • Built-in stopwatch.

OTHER PRODUCTS

ON-SITE TESTING Cytotoxic drug safety cabinets are factory tested and certified by a NATA-Accredited laboratory. Additional testing and certification is recommended as follows:

• HWS Series TM horizontal laminar flow cabinets. • VWS Series TM vertical laminar flow cabinets. • BSC2000 TM Class I biological safety cabinets. • BH2000 TM Class II biological safety cabinets.

• On site prior to use • After maintenance • After filter replacement

• PCR laminar flow cabinets. • Recirculating fume cabinets.

• TFP TM Series HEPA filter clean room modules. • Exhaust Capture Hood for Cytotoxic Suite. • Pass through hatches.

• After re-location • At least annually • In special circumstances, e.g. if faulty operation is suspected.

THE COMPANY AES Environmental is an Australian owned manufacturing business producing products under Clyde-Apac, Email Air Handling and Vokes brand names for industries that are as varied as industrial plants, commercial buildings, power stations, food processing, healthcare, science and electronics. AES Environmental considers the Australian Standards as a core component of its product mix and has developed an export market in 25 countries, promoting Australian Standards, engineering and manufacturing solutions. AES Environmental, a trusted manufacturer capable of delivering reliable product solutions to highly-critical applications, where the control of hazardous airborne contamination is often critical to process and personnel.

CREATING SAFER LABORATORIES

FC120P SERIES DIRECT DUCTED FUME CABINET

DESCRIPTION FC-120P Series cabinets have been developed to protect laboratory staff and the environment from toxic vapours, gases, fumes and particles. The cabinets are designed and manufactured to fully comply with Australian Standard AS2243: Fume Cabinets. The FC-120P cabinets are suitable for benchtop use and supplied with an acrylic work tray. When supplied without the work tray, the cabinet may be installed over a sink or an item of equipment. FC-120P cabinets can be supplied with a special trolley or stand which allows a separate trolley to be wheeled into the containment enclosure.

The mobility of trolley-mounted FC-120P cabinets is a significant advantage in hospitals or large research institutions, where materials such as glutaraldehyde are handled at multiple locations. These applications include endoscope sterilisation. The FC-120P cabinet has an inward air velocity that is maintained at > 0.5 m/s ±20% for both benchtop and trolley-mounted installations. In most applications, filtered exhaust air may be discharged to the room. In special cases, where the nature or concentration of the contaminant indicates, the cabinet exhaust may be connected to an exhaust fan/duct system that discharges to atmosphere. FC-120P cabinets are produced in two (2) sizes, with 900 or 1200 mm nominal work zone width.

FILTRATION

FC120-P SERIES This process extends filter life as the surface of the catalyst will not be covered by molecules trapped on it, thus enabling the process to be repeated. These filters will operate effectively in environments with temperature up to 70oC, and with relative humidity up to 80%. AES Environmental continues to push the design boundaries of its Direct Duct Fume Cabinet range; the FC-120P series has been developed for the safe containment of volatile compounds. The special P series features an explosion proof fan and can be configured with a dual bed of carbon or activated alumina to provide a wider range of contaminant removal. The P series is available in 1200mm and 1700mm widths to accommodate for the larger filtration surface area and specially selected fan and operating controls.

Air exhausted from the top of the cabinet is filtered by a one-stage filtration system. A prefilter protects the final filter system from particulates > 5μm. The final activated carbon filter incorporates carbon granules with a selected chemical impregnation to optimise the arrestance of specific vapours. Specific impregnations are available for the handling of a wide range of contaminants, including formaldehyde and glutaraldehyde, Alkaline odours, Ammonia and amines, Inorganic acids and acidic odours, H2S and mercaptans and HCN. Special adsorption filters are fitted for the capture of a wide range of vapours. Chemical impregnation of the carbon produces a chemical reaction similar to an oxidation process when the contaminant is adsorbed.

CONSTUCTION CABINET

ON-SITE TESTING Products produced by AES are factory-tested to ensure compliance and performance targets are met. Additional testing and certification is recommended as follows: - On-site prior to use - After any electrical of mechanical maintenance - After filter replacement - After re-location - At least annually - In special circumstances, e.g. if faulty operation is suspected. AES Environmental is a NATA registered laboratory that provides comprehensive on- site maintenance, testing and certification services of safety cabinets, laminar flow work stations, cleanrooms, operating theatres and HEPA filter installations.

ELECTRICAL Cabinets operate on single-phase 240V, 50 Hz power via a 10A outlet. A low voltage touch control panel with function status indicated by LEDs is located on the front of the cabinet. Glare-free fluorescent lamps provide a minimum lighting intensity of 800 lux at the work surface. PREFILTERS An easily-accessed, disposable polyester prefilter arrests not less than 90% of particulates > 5μm, thus prolonging carbon filter life. A warning light in the control panel signals the need for prefilter service. Outer casing of the FC-120P is constructed from acrylic , galvanized steel, powder-coated to AS2700. The work zone is constructed in Grade 304 stainless steel. A removable aluminium screen is fitted in front of the prefilter at the rear of the work zone. FAN A direct drive motor/blower is regulated by a variable speed controller to enable airflows to be maintained through filter life.

AES Environmental maintains an ISO 9001:2008 quality management system to ensure process and product conformance.

PRODUCT RANGE

In addition to FC-120P fume cabinets, AES Environmental manufacture the full range of Clyde Apac standard and custom designed equipment, including: • BSC2000 Series Class I biological safety cabinets • BH2000 Series Class II biological safety cabinets • TFP Series HEPA filter cleanroom modules • HWS Series horizontal laminar flow clean work stations (laminar flow cabinets) • VWS Series vertical laminar flow clean work stations (laminar flow cabinets)

• RFC Series filtered fume cabinets

• OTS Series laminar flow operating theatre systems • HBM Series laminar flow over bed units • PHU Series laminar flow powder containment booths

• SPF Series sterile animal holding units

• VAS Series containment animal holding units • Modular laminar flow cleanroom systems horizontal and vertical flow

• Custom designs for any application

CREATING SAFER LABORATORIES

HWS & VWS SERIES II LAMINAR FLOW CABINETS

APPLICATIONS HWS (Horizontal-flow) & VWS (Vertical- flow) Series cabinets are designed to provide a high degree of protection for process products and apparatus in laboratory and production facilities. Many critical applications in the medical, pharmaceutical, scientific and electronics fields demand an ultra-clean work environment that is free from biological and particulate contamination. Typical applications include: • Aseptic dispensing, • Assembly of electronics and optics components, • Cell culturing, • Media pouring, • Preparation of medical devices and • Sterility testing. HWS & VWS Series cabinets are intended for work with non-hazardous materials in such applications. DESCRIPTION HWS & VWS Series cabinets are self-contained Class 3.5 horizontal (HWS) or vertical (VWS) laminar flow work stations designed for installation on standard laboratory benches, or on optional floor stands. Cabinets are available with nominal work zone width of 900mm 1200mm or 1800mm. Each cabinet is factory-tested and built to comply with the AES Environmental quality management system. These units can be certified on-site by a NATA-Accredited laboratory to establish compliance with the performance requirements of AS2252.6 - 2011.

HWS & VWS cabinets contain pre-filters and HEPA/Absolute filters, the design of the filtration system enables removal of airborne contamination from air passed through to the work area. The large filter face is matched to a plenum design that ensures a smooth laminar (unidirectional) flow of clean air through the work area and prevents entrainment of outside air. In HWS cabinets, air is passed through the work zone in a smooth, horizontal direction, the blower fan and mounting position are designed to maximize airflow. The deeper rear plenum ensures unobstructed airflow to the HEPA filter face. As a result, the cabinet is quieter with reduced vibration and longer service life for the HEPA filter. In VWS cabinets, a portion of the laminar flow air recirculates to the top plenum to give better airflow control and minimise turbulence in the work area. This also increases the HEPA filter service life. An optional application of sound-deadening coatings in the upper plenum areas of both cabinet styles minimises noise and vibration, this option is particularly useful if work is conducted in ultra-quiet environments.

CONSTRUCTION

The housing is constructed of locally sourced steel and consists of a high- quality powdercoated finish to provide a suitably solvent, alkali and acid resistant laboratory grade coating. The work area is fully constructed from stainless steel, with inward folds to avoid sharp edges. A removable, washable metal screen protects the HEPA filter from mechanical damage. A direct-drive fan is regulated by a speed controller to enable airflow to be maintained through filter life. Fans and filter plenums are designed to provide quiet operation and low vibration level. Clyde-Apac® Microseal™ HEPA filters, are certified for compliance to AS 4260. Each filter is individually certified to be leak-free in accordance with AS 1807.6. A manfufacturer endorsed test label fitted with an extract of the test report is affixed to each filter. A prefilter extends the life of the exhaust HEPA filter and protects it from the mechanical damage during cleaning of the work zone. An easily-accessed, washable pre-filter arrests not less than 90% of particles 5 micron and larger, thus prolonging HEPA filter life. A warning light in the control panel signals the need for pre-filter service. A low voltage touch control panel is located on the front of the cabinet. Glare-free lamps provide a minimum lighting intensity of min 650 lux at the work floor.

CABINET

FANS

HEPA FILTERS

PRE-FILTERS

ELECTRICAL

HWS CABINET

VWS CABINET

B A

PHYSICAL DATA (MM) MODEL

PHYSICAL DATA (MM)

A B C D KG 980 880 1130 580 120 1280 1180 1130 580 150 1280 1180 1280 730 180 1890 1790 1130 580 200 1890 1790 1280 730 230

MODELA B C D E KG VWS 90 1000 880 1420 712 550 690 150 VWS 120 1342 1180 1420 712 550 690 200 VWS 180 1962 1800 1420 712 550 690 270 F

HWS 90 HWS 120

HWS 120/75

HWS180

HWS180/75

• Stainless steel work zone • Low voltage touch controls • Pre-filter service • Glare-free fluorescent lighting • Comprehensive operation manual • Power outlet

• Stainless steel work zone • Pre-filter service • Partial airflow recirculation • Comprehensive operation manual • Low-voltage touch controls • Glare-free fluorescent lighting • Quiet, low-vibration operation

STANDARD FEATURES

• Hourmeter • Manometer • Service taps for air, gas and vacuum • Extra quiet operation • Floor stand (fixed height) • Floor stand (electric height - adjustable) • Germicidal UV lamp • UV shield/ work zone cover

• IV hanging rail • Hourmeter • Manometer • Service taps for air, gas and vacuum • Extra quiet operation • Floor stand (fixed height) • Floor stand (electric height - adjustable)

• Double-sided operation • Recirculating avaliable • IVF avaliable • Germicidal UV lamp • UV shield/ work zone cover

OPTIONS

ON-SITE TESTING HWS & VWS Series cabinets are factory tested and certified by a NATA-Accredited laboratory. Additional testing and certification is recommended as follows:

PERSONNEL PROTECTION HWS & VWS cabinets provide protection for products or experiments, but do not protect personnel from aerosols of hazardous materials that may be handled in the cabinet. For applications where personnel and environmental protection is required, Clyde- Apac Class I or Class II biological safety cabinets, or cytotoxic drug safety cabinets (as applicable) should be considered.

• On site prior to use • After maintenance • After filter replacement

• After re-location • At least annually • In special circumstances, e.g. if faulty operation is suspected. OTHER PRODUCTS • UltraSafe™ Cabinet Series • CSV™ Cabinet Series • CG2000™ Cytotoxic Drug Safety Cabinets

AES Environmental maintains an ISO 9001:2008 quality management system to ensure process and product conformance.

CREATING SAFER LABORATORIES

LFC SERIES RECIRCULATING FUME CABINET

dhe upper housing

Kptional openͲďase worŬ area

DESCRIPTION The LFC Series fume cabinet is a compact, recirculating fume cabinet that has been designed to provide operator safety and ease of use in laboratory applications. Capture of fumes is achieved by inward airflow at a velocity of > 0.5 m/s and carbon filtration of exhaust air. The upper housing contains the mains switch, low-airflow alarm, speed control and carbon filter.

APPLICATION

Cabinets are supplied with an open base and can be positioned over an existing utility such as a sink or be placed directly on to a flat bench. The LFC cabinets are available in three widths; 600mm (LFC60), 900mm (LFC90) and 1200mm (LFC120). An optional work tray, manufactured from polypropylene, is available if containment of spills is required. A trolley stand is also available as an option across the LFC cabinet range. The standard activated-carbon filter filter is suitable for use with a wide range of common laboratory fumes. Special- purpose carbon filters for specific applications are available to order.

RECIRCULATING, FILTERED FUME CABINET

fume cabinet LFC Series

For use in accordance with AS2243 Part 9

254448

SPECIFICATIONS Construction

Baked enamel coated top module.

Colour

Grey

Windows

Clear Perspex

Spillage Tray

Optional polypropylene

Fan

Centrifugal 240V, 50Hz

Electrical Supply

Controls

Mains Power On/Off

Monitoring

Alarm for airflow and filter condition.

Airflow m3/h

200

Face Velocity m/s

> 0.5

Carbon filter no. & mass LFC60 Carbon filter no. & mass LFC900 & LFC1200

1 x 4kg

2 x 4kg

Noise Level dB(A)

DIMENSIONS

MODEL WIDTH DEPTH

LFC60 600mm 580mm 800mm 500mm

LFC90 900mm

LFC120 1200mm

580 800 500

OVERALL HEIGHT WORKING HEIGHT

WORK AREA

580 x 520

580 x 820

580 x 1120

ON-SITE TESTING Cytotoxic drug safety cabinets are factory tested and certified by a NATA-Accredited laboratory. Additional testing and certification is recommended as follows:

AES Environmental maintains an ISO 9001:2008 quality management system to ensure process and product conformance.

• On site prior to use • After maintenance • After filter replacement

• After re-location • At least annually • In special circumstances, e.g. if faulty operation is suspected.

CREATING SAFER LABORATORIES

Mk7 Series Safety Cabinets

The Mk7 Series are a division of AES Environmental which includes the latest safety cabinets from Email Air Handling. Designed and built in Australia, Email Air Handling cabinets are ideal for laboratories seeking reliable and easy to use equipment. The Mk7 range includes models to cater for most typical applications, including Class I & II biological safety cabinets. Beyond this scope the company also has extensive experience in engineering products for specialist applications. These cabinets have been made for critical working environments, so all equipment fully complies with the relevant Australian Standards. HEPA/Absolute filters are installed, each one being factory tested to AS 4260.2 to ensure 99.99% minimum efficiency and scan tested to AS 1807.6. These filters are manufactured by Email Air Handling in Australia.

Biological Class II Cabinets Designed as a modular workstation for use in laboratory applications, your Mk7 Class II cabinet protects the operator from the risks posed by biological agents while providing a contaminant-free work zone for the protection of cultures/samples. This model can also be manufactured to Class I specification if preferred. Cytotoxic Drug Safety Cabinets Cytotoxic drug safety cabinets are defined as the primary barrier against exposure to aerosols that are produced in the preparation, manipulation and dispensing of cytotoxic drugs. In addition to product and personnel protection, the Mk7 Cytotoxic contains extra HEPA filtration to protect all serviced components of the cabinet from harmful contamination.

FEATURES

• A clever interlocking switch design prevents accidental exposure to UV light. Should the front window be opened whilst the cabinet is in use an override program ensures your safety by automatically adopting a class 1 bio-safety mode. This feature will auto-cancel when the front window is closed again. • The modern, proven control panel provides one touch access to all functions including servicing. A fully integrated self-diagnostic processor with digital status display backed up by an audible and visual alarm guarantees your safety. • An internally mounted, exhaust HEPA filter adds to the stylish features and modern design of the cabinet by freeing the outer shell from protrusions. • The work area is large, airy and bright. Light pours in through large toughened glass sides and a wide pneumatically assisted front window. • The stainless steel work tray is reversible on Class II models, giving you the choice of a flat work table or a generous spill containment tray. • An ergonomically designed flat front intake grille allows for optimum operator comfort and prolonged use with ease. • The low profile allows comfortable installation in 2700mm ceiling for top vented cabinets. • A large front opening (215mm) permits standard animal cages handling without compromising sterility and safety containment.

Not merely modified but designed & built to meet Australian standards.

• Performance and reliability of Class II cabinets are guaranteed by full compliance with AS 2252. Part 2 and its 2004 revision. • The new Mk7 Class II Cabinets also meet and exceed the performance requirements of EN12469 & NSF 49-Annex F. safety and performance requirements. • Heavy gauge stainless steel and superior materials are used throughout. Direct drive fans (2 or more), dynamically balanced for vibrations free operation, ensure large flow reserves for years of trouble-free operation. • Low power consumption / eco-friendly (LED lighting). • Extended viewing window height. • Updated electronic controllers that provide consistent, repeatable performance and easier service accessibility (wifi enabled, bms enabled). • Low vibration. • Low noise. • Improved power stability for export / Asian region. • Sash window option.

ACCESSORIES & OPTIONS

• Gas tap (solenoid-interlocked) • Service taps (air, CO2, etc.) • Vacuum tap (disc filter holder) • Extra power outlet (1 x power outlet supplied as standard feature) • Choice of Top, L/H or R/H exhaust

• Floor stand, semi-adjustable (height to order) • Electronically-controlled, height adjustable floor stand • Decontamination panel

Floor stand

Gas tap

AES Environmental maintains an ISO 9001:2008 quality management system to ensure process and product conformance.

Glass sides & large front access opening

OPERATION

2 3

8 9

Control Panel 1. Fan/post-use over-run switch 2. Power outlet switch 3. Gas reset switch* 4. Fluorescent light switch 5. UV lamp switch* 6. Boost mode switch 7. Display panel 8. Mains power indicator

9. Alarm indicator *optional function

4 5 6 7

High-efficiency filters and fans deliver quiet operation and safety. Negative pressure zones surround all positive pressure areas, eliminating the possibility of contaminated air bypassing the filter or escaping from the cabinet. Outer shells are gas-tight for safe decontamination. In operation, vertical laminar airflow through a HEPA filter bathes the work tray, dividing and passing around the perimeter to create a biologically clean work area. In Class II & Cytotoxic cabinets: An air barrier across the work access opening, into the sump, reduces potential risks to personnel from airborne contaminants in the work zone. In Class II models, the airflows mix in the sump before recirculation via a return air plenum to the top housing. Exhaust air is passed through a HEPA filter for return to the laboratory.

In Cytotoxic models, the airflows combine in the sump area beneath the work floor and pass through an extra HEPA filter before recirculation via a return air plenum, to the top housing. Separate fan/filter arrangements allow independent adjustment to maintain an effective air barrier. A microprocessor is used to control the speed of the blower motors. This microprocessor also allows fingertip control of functions and status including: • Cabinet performance and status clearly displayed in plain English. • Boost mode. • Built-in stopwatch.

CLASS II SAFETY CABINETS

1345

750

HEPA FILTER

Laminar air flow pattern through a Class II cabinet.

Model Mk5. 1200

SPECIFICATIONS

OPERATION Filters HEPA

Mk 5. 900 CLII BSC 99.997% to 0.3 micron 800 Lux at work surface

Mk 5. 1200 CLII BSC 99.997% to .3 micron 800 Lux at work surface

Mk 5. 1800 CLII BSC 99.997% to .3 micron 800 Lux at work surface

Lighting

Germicidal UV lamp

400mW/m 2 240v/50 Hz

Electrical supply

Power Consumption (Kw)

0.7

1.1

2 x 240V Single Phase Direct Drive

3 x 240V Single Phase Direct Drive

Fans

Exhaust air volume (m 3 /Hr)

780

1044

1548

Noise Level

65dBA at 1m

L/H, R/H, Front or Top

Discharge Options DIMENSIONS Work Aperture

205mm

Work area W x D x H (mm)

870 x 560 x 620 1035 x 750 x 1500

1180 x 560 x 620 1345 x 750 x 1500

1810 x 560 x 620 1975 x 750 x 1500

Outer dimensions W x D x H (mm)

Weight ((kg)

195

210

300

CONSTRUCTION Front screen Internal work area & tray Outer construction Manufacturing Compliance to

6mm Laminated glass 304 Stainless Steel Mild steel with powder coating

AS 2252.2 - 2004 Part 2

Certification to

AS 1807.1 / AS 1807.5 / AS 1807.6 / AS 1807.15 / AS 1807.20 / AS 1807.22 / 1807.23

CLASS I SAFETY CABINETS

1345

PRE - FILTER

SPECIFICATIONS

OPERATION

CLASS I 1200mm

CLASS I 1800mm

Lighting

800 Lux at work surface

Electrical supply

240v/50 Hz

Power Consumption (KW)

0.5

HEPA Filter Noise Level

99.997%

<65dBA at 1m

DIMENSIONS Working height of glass Work area W x D x H (mm)

525mm

1180 x 640 x 620 1345 x 720 x 1400

1810 x 640 x 620 1975 x 720 x 1400

Outer dimensions W x D x H (mm)

Weight ((kg)

200

270

CONSTRUCTION Front screen Internal work area & tray Outer construction

6mm Laminated glass 304 Stainless Steel Mild steel with powder coating

CYTOTOXIC DRUG SAFETY CABINETS

Laminar air flow pattern through a Cytotoxic cabinet.

SPECIFICATIONS

OPERATION Filters HEPA

Mk 5 Series 1200mm CDSC

Mk 5 Series 1800mm CDSC

99.997% to 0.3 micron 800 Lux at work surface

99.997% to .3 micron 800 Lux at work surface

Lighting

Germicidal UV lamp

400mW/m 2 240v/50 Hz

Electrical supply

Power Consumption (Kw)

1.5

Fans

3 x 240V Single Phase Direct Drive

Exhaust air volume (m 3 /Hr)

1044

1548

Noise Level

65dBA at 1m

Left, Side, Right or Top

Top only

Discharge Options DIMENSIONS Work Aperture

210mm

190mm

Work area W x D x H (mm)

1180 x 560 x 620 1345 x 750 x 2216

1760 x 560 x 620 1990 x 750 x 2380

Outer dimensions W x D x H (mm)

Weight ((kg)

360

630

CONSTRUCTION Front screen Internal work area & tray Outer construction Manufacturing Compliance to

6mm Laminated glass 304 Stainless Steel Mild steel with powder coating

AS 2567 - 2000

Certification to

AS1807.1 / AS1807.5 / AS1807.6 / AS1807.15 / AS1807.20 / AS1807.22 / AS1807.23

DOWNFLOW CABINETS

1345

PRE - FILTER

Laminar air flow pattern through a Downflow cabinet.

SPECIFICATIONS

OPERATION

3300/612 Downflow 1200 800 Lux at work surface

3300/618 Downflow 1800 800 Lux at work surface

Lighting

Electrical supply

240v/50 Hz

Power Consumption (KW)

0.5

HEPA Filter Noise Level

99.997%

<65dBA at 1m

DIMENSIONS Working height of glass Work area W x D x H (mm)

525mm

1180 x 640 x 620 1345 x 720 x 1400

1810 x 640 x 620 1975 x 720 x 1400

Outer dimensions W x D x H (mm)

Weight (kg)

200

270

CONSTRUCTION Front screen Internal work area & tray Outer construction

6mm Laminated glass 304 Stainless Steel Mild steel with powder coating

SUPPORT

From years of experience in the design and manufacture of safety cabinets in Australia, the new generation Mk7 series cabinets have been designed with the end user in mind. Simple to operate and encompassing safety and reliability this stylish new cabinet is supported by our nationally focused spare parts and service divisions located in all major centres.

WARNING Email Class II biological safety cabinets comply with AS 2252.2 in all three vital areas: • cabinet design/construction • cabinet performance • air filter performance Some cabinets on the Australian market do not comply in all of these areas. A decision to use such equipment should be taken only after careful consideration of the risk posed by the materials to be handled and with the agreement of those who will operate the equipment. (see current and proposed Health and Safety Regulations).

CREATING SAFER LABORATORIES

RFC SERIES RECIRCULATING FUME CABINET

FILTRATION

Air exhausted from the top of the cabinet is filtered by a two-stage filtration system. A prefilter protects the final filter system from particulates > 5μm. The final activated carbon filter incorporates carbon granules with a selected chemical impregnation to optimise the arrestance of specific vapours. Specific impregnations are available for the handling of a wide range of contaminants, including formaldehyde and glutaraldehyde, Alkaline odours, Ammonia and amines, Inorganic acids and acidic odours, H2S and mercaptans and HCN. Special adsorption filters are fitted for the capture of a wide range of vapours. Chemical impregnation of the carbon produces a chemical reaction similar to an oxidation process when the contaminant is adsorbed. This process extends filter life as the surface of the catalyst will not be covered by molecules trapped on it, thus enabling the process to be repeated. These filters will operate effectively in environments with temperature up to 70oC, and with relative humidity up to 80%.

DESCRIPTION RFC Series cabinets have been developed to protect laboratory staff and the environment from toxic vapours, gases, fumes and particles. The cabinets are designed and manufactured to fully comply with Australian Standard AS2243.9: Recirculating Fume Cabinets. The RFC cabinets are suitable for benchtop use and supplied with a stainless-steel work tray. When supplied without the work tray, the cabinet may be installed over a sink or an item of equipment. RFC cabinets can be supplied with a special trolley or stand which allows a separate trolley to be wheeled into the containment enclosure. The mobility of trolley-mounted RFC cabinets is a significant advantage in hospitals or large research institutions, where materials such as glutaraldehyde are handled at multiple locations. These applications include endoscope sterilisation. The RFC cabinet has an inward air velocity that is maintained at > 0.5 m/s ±20% for both benchtop and trolley-mounted installations. In most applications, filtered exhaust air may be discharged to the room. This avoids the air supply system problems that arise with ducted cabinets. In special cases, where the nature or concentration of the contaminant indicates, the cabinet exhaust may be connected to an exhaust fan/ duct system that discharges to atmosphere. RFC cabinets are produced in two (2) sizes, with 900 or 1200 mm nominal work zone width.

RFC-P SERIES

AES Environmental continues to push the design boundaries of its Recirculating Fume Cabinet range; the RFC-P series has been developed for the safe containment of volatile compounds. The special P series features an explosion proof fan and can be configured with a dual bed of carbon or activated alumina to provide a wider range of contaminant removal. The P series is available in 1200mm and 1700mm widths to accommodate for the larger filtration surface area and specially selected fan and operating controls.

CONSTUCTION

CABINET Outer casing of the RFC is constructed from galvanized steel, powder-coated to AS2700. The work zone is constructed in Grade 304 stainless steel. A removable aluminium screen is fitted in front of the prefilter at the rear of the work zone. FAN A direct drive motor/blower is regulated by a variable speed controller to enable airflows to be maintained through filter life.

ELECTRICAL Cabinets operate on single-phase 240V, 50 Hz power via a 10A outlet. A low voltage touch control panel with function status indicated by LEDs is located on the front of the cabinet. Glare-free fluorescent lamps provide a minimum lighting intensity of 800 lux at the work surface. ON-SITE TESTING Products produced by AES are factory- tested to ensure compliance and performance targets are met. Additional testing and certification is recommended as follows: - On-site prior to use - After any electrical of mechanical maintenance - After filter replacement - After re-location - At least annually - In special circumstances, e.g. if faulty operation is suspected. AES Environmental is a NATA registered laboratory that provides comprehensive on-site maintenance, testing and certification services of safety cabinets, laminar flow work stations, cleanrooms, operating theatres and HEPA filter installations.

PREFILTERS An easily-accessed, disposable polyester prefilter arrests not less than 90% of particulates > 5μm, thus prolonging carbon filter life. A warning light in the control panel signals the need for prefilter service.

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48

ht.co.id